5% OFF WITH CODE HKOBD2
HKOBD2 Diagnostic One-Stop Service Center
VAG HEX V2 Intelligent DualK & CAN USB Interface Online / Offline Version
VAG AHEX V2 Cable Overview:
Online Software Version:V23.11 (Support online upgrade to the latest version)
Offline Software Version: V23.11 (No support for online upgrade)
Support Language: English, French, German, Chinese, Russian, Italian, Czech, Hungary, Spain, Portugal, Sweden, Netherlands, Russia etc. (Need to use the loader to run all languages)
Offline Version support English + one language (please note the language you need)
Vehicle List: For A-udi/V-W/Skoda/Seat etc.
System Requirements: Windows 7 or newer
VAG COM HEX V2 Cable Software Multi-language As Following:
EN English
PTT Portugal
HGJ Hungary
FRM French
CN Chinese
EST Spain
ITT Italy
DE German
ROJ Romania
RUS Russian
AKP Poland
PRI Netherlands
WITH VAG YOU CAN:
1. Gain factory level access to all systems in cars from 1999 through the current model year
2. Scan for and clear DTCs with 19,000+ fault codes decoded into plain text
3. Alter settings through module coding accessible only by factory level tools
4. Perform various country-specific modifications to your car (remove seat belt chime, enable gauge test/needle sweep, enable lap timer, operate windows and sunroof with remote, and much more)View and log live data
5. Reset service reminder
6. Perform built in tests and calibrations normally reserved for factory level tools
7. Diagnose real failures instead of swapping parts!
VAG Hex V2 Features:
1. Fully licensed for V-CDS software, acts as the key to unlock the software, no additional software purchase required.
2. USB connection, compatible with all modern laptops.
3. Compatible with all diagnostic-capable V-W/A-udi passenger cars from 1999 to current; K, K+L, dual-K, or CAN.
4. Detachable USB cable.
The supplied cable has a proprietary screw locking mechanism, but it can be replaced temporarily with a standard USB-A to USB-B ("printer") cable when it becomes damaged.
5. Modern 32-bit micro-controller and fully updatable firmware.
6. Tri-Color (red/green) status/activity LEDs with greatly improved visibility from almost any angle.
7. Includes an embedded license for V-CDS and thus acts as a "dongle" for the software, allowing the software to be used and installed on any compatible PC.
Computer Requirements:
We recommend at least a 1 GHz dual-core processor with 1 GB of RAM and Windows 7 or newer(Windows 7 through 10, but not RT) with an available USB 2.0 (or higher) port.
Slower computers or Windows 2000, XP, and Vista may work but are not officially supported.
Windows 8. 8.1 or 10 on a machine robust enough to support the respective operating system are also fine.
Windows running inside a Virtual Machine (for example on a Mac) is not supported.
Extending this Interface:
The cable supplied with this interface is about 6 feet long -- just right for most laptops.
The USB standards do not allow for passive extension cords!
We have tested many Active USB extensions and have found one that works. You can order the 16-ft Active USB Extension from our Store. We do not sell or support any other brands or models of USB extensions, if you have problems when using one, the first thing we're going to tell you is to eliminate the extension. We sell also a 3-ft OBD extension in our web store that lets you keep your diagnostic tool connected and away from the driver's feet and legs.
Original Plan 1:1 VAG HEX V2 Kable VAG COM Interface Display:
NEZ Denmark
AER Swedish
CZ Czech
HE-X V2 Cable PCB Board Display:
xxxxxx
Your cart is currently empty.