SM2 Pro J2534 VCI ECU Programmer(V2.21.22) Read&Write Tool Supported 67 Modules

SM2 PRO Hardware Version : V2.21.22

Add extra Features,Supports J2534 For Toyo*t (Depends on buyer have software)

67in1 Dongle V1.20 support 67 modules :

Activate Licenses

1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,29,30,31,32,33,34,35,36,38,40,42,43,45,46,47,48,50,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74

Above total 67 modules, support thousands of car brands, read and write ECU and GearBox ,power upgrade tool,clone ECU to read and write. Best chip tuning tools !

69 in 1 Dongle V1.21 supports more 11 modules then 67 IN 1 :

19 30 48 51 53 57 58 61 69 71 76 (67in1 dongle v1.20 does not support module 51 and 76 )

What is difference between SM2 PRO J2534 VCI And BENCH , FLASH ,OBD?

1. Different SN number

BENCH ,FLASH,OBD . All SN number is A55259.

Actually they are the same hardware, just a different case,you also can check the PCB board of them.

SM2 PRO J2534 VCI SN: A78370. it is different as others in the market.

2. Different hardware version

Bench ,FLASH,OBD hardware version is 2.21.2 .

SM2 PRO J2534 VCI hardware version is 2.21.22 .

It is very new version . It's already updated 16 versions vs others hardware. and it was added many new functions and more stable .

What are SM2 PRO Advantages：

1. Our hardware support all J2534 protocol software

2. Dont need register and active device. you can work it directly . and more pay attention to protecting personal privacy

3. When you update your device by mistake. it will not be locked. you just come back to correct driver version to work.

4. Support newest cars and do online programming (with online account) .for example GD//s software work with 2021 year G$M Buick ENVISION, 2021 year CADILLAC XT5 .we have tested online programming and working perfect!!!

Functions:

1. Read and write ECU data

2. ECU clone

3. ECU parameter adjustment

4. ECU maintenance engineering

5. Chip turing

6. Read ECU maps

7. Checksum correction

8. Stage1-3, gearbox tuning etc...

9. Read flash and ep files

10. Powertrain adjustment

11. Support online update

12. VR files supply

13. Pinout comewith

14. Helpdesk and tuner account

15. OBD2 reading

16. Cover-free wielding-free no disassembly data reading, greatly reduce the risk of destroying the ECU, bench mode.

17. Cover-opening data reading, boot mode

200 Newly-added Bosch MED/EDC17 Read/Write Protocols Without Opening the Cover.

What program does it support:

Support List

It cannot support CAN FD

Please Note: above supports need buyer have software yourself and test in real operation,we donot have after-sale service for those programmer.