Scania VCI 3 Scanner Full Chip Version Scania VCI 3 Trucks Diagnostic Tool For Scania V2.53.5

Scania VCI 3 Scanner Full Chip Version Scania VCI 3 Trucks Diagnostic Tool For Scania V2.53.5

For Scania VCI 3 Scanner Highlights:

1. Software Version: V2.48.2

2. Support Vehicles: All Scania Trucks, Buses, and other Heavy Vehicles or Heavy Duty Engines Made by Scania

3. Support Wifi

4. Update: Buy new software

5. System: Only work on WIN7/ WIN10 system

6. Support Multi-Languages: English, German, Spanish, French, Japanese, Dutch, Polish, Portuguese, Swedish, Norwegian, Suomi, Turkish, Italian, Czech, Russian, Chinese

Note: The adapter does not work with trucks and engines manufactured before 2004.

For Scania VCI 3 Scanner Description:

1. For Scania VCI3 is designed to support all Scania diagnostic systems based on CAN network, it’s a extremely fast yet very compact diagnostic tool.

2. One of the most interesting new features that can be found in Scania VCI3 is a Wifi wireless connection (also there is a USB connector for wired connection).

3. From now you can work without wired connection to your truck, just forget these problems like damaged data cables and other disadvantages of wired connections.

4. Software support for Scania VCI3 appeared in Scania SDP3 2.18 version so if you want to use this tool you need this version of SDP3 or later versions of this software.

5. The device is designed for full service trucks, buses and other heavy vehicles, which produces the corporation SCANIA. Adapter works in conjunction with software SDP-3.

6. The adapter does not work with trucks and engines manufactured before 2004.

7. The main feature of VCI-3 - Work through a high-speed WI-FI connection. Also in the device has a USB port.

For Scania VCI 3 Scanner Features:

1. WLAN version 802.11b/g

2. Encryption protocols: WPA2/WPA/WEP128/WEP64

3. USB 2.0 (compatible with USB 1.1)

4. Lightweight aluminum housing with IP67 protection

5. Polyurethane cables for extreme conditions.

6. Operating voltage CAN BUS (7 - 40V DC)

For Scania VCI 3 Scanner Functions:

1. Check and adjustements

2. Conversion

3. Maintenance

4. Campaign

5. Bodywork

6. Fault Codes

7. Fault Reporting

8. Programming of Control units

Need Netframework 4.5 installed on system.

In order to install SDP3, administrator rights are required.

UPDATE ECA Please also see Scania Ti 04-14 02 16 for more information about background and regarding the update process.

SOPS EDITOR INCLUDED:

Download with SDP3 from truck SOPS export file;

Decrypt SOPS export file to XML format;

Edit XML file with any XML editor;

Modify more than 300 parameters: like AdBlue, EGR, NOx Control, see whole list;

Encrypt XML file to SOPS import file;

Upload SOPS import file to truck with SDP3;

Scania XCOM - is a diagnostic tool to read, save and modify ECU data such as trouble codes, parameters, statistic data etc. VCI2/VCI3 interface is used to connect to ECU via CAN protocol.

Supported modification of ECU data of the following types:

EMS – Engine management system.

GMS – Gearbox management system.

RET – Retarder system.

AWD – All wheel drive system.

CLS – Clutch Control.

EEC – Exhaust Emission Control.

COO (COO7) – Coordinator.

BWS (BCI1) – Bodywork system

Supported resolving trouble codes to text descriptions for the following types:

EMS (S6, S7, S8).

GMS (OPC4, OPC5).

RET (RET1, RET2).

AWD (AWD1).

EEC (SCR1, EEC3).

COO (COO6, COO7).

HMS (HMS1).

Some other options:

AdBlue ON/OFF.

EGR ON/OFF.

Chassis ID/VIN Change.

Immobilizer ON/OFF.

Truck Power INCREASE.

ECU Recovery.

ECU Reset.

ECU Unlock.

For Scania VCI 3 Scanner Software Display: 

For Scania VCI 3 Scanner Package:

1pc x for Scania VCI 3 adapter
1pc x SDP3 Software CD